How to Load Audio or Video Files into Express Scribe for Mac (Full Transcript)

Speaker 1: Hi I'm Sam from Transcription City and today I'm going to show you how to load an audio or video file into Express Scribe for Mac. Okay so I'm just opening up Express Scribe, it's already in the bottom here so just double click on that opens it up and you can see the software here. Basically you've got the different files here and then you've got play, stop, fast forward, rewind. Now you've got two ways of loading a file on, you can either click load and then go to the location of wherever the sound file has been saved so in this case it's in the desktop and it's a video file so just double click on it there and wait for it to load. Now it usually loads here, you can see when it's finished and there you can see we've got how to use Express Scribe. Then all you would do is to play it, you would use your foot pedal, you can either use your foot pedal, the hot keys or otherwise you can obviously manually click on it, start and stop using your mouse. Okay so that's how to load one on with the load button but also what you can do is, obviously it's on the desktop already so if I wanted to do it a quicker way and it's already available on the desktop all you'd have to do is just drag and drop it into the display here and you've got exactly the same thing. Obviously then again you can press play or stop as you like. There you go so that's how to load a video or audio file onto Express Scribe. Thanks for watching and don't forget to subscribe.